• Homogeneous Vinyl with Diamond Plated Surface Pattern Surface
  Consistent electrical and slip resistant properties
• Exceeds ANSI/ESD S20.20 required limit 10E9 ohms for ANSI/ESD floor
  Suitable as floor in ANSI/ESD STM 97.1 floor-footwear system
• Diamond Plate Pattern
  Provides better traction especially where moisture may accumulateHighly
• Visible Yellow Border
  Excellent as a floor runner - chairs and carts roll easily across the surface
• Works in Conjunction with Conductive ESD Tiles or Paint
  Maintains consist path to ground when on operator is on properly grounded conductive floor mat
• This is NOT an anti-fatigue mat
  For anti-fatigue mats, see item 40982
• Made In America

*Conductive (<10E6) as defined by ANSI/ESD S7.1, Floor Materials – Characterization of Materials.

**Designed to exceed requirements of ANSI/ESD S20.20 for primary ground of mobile operators, Flooring / Footwear System – Method 1, <3.5 X 10E7 Operator Resistance to ground, tested per ANSI/ESD STM 97.1, Floor Materials and Footwear – Resistance Measurement in Combination with a Person, when used with proper ESD foot grounders.

“ESD protective flooring, used with approved footwear, may be used as an alternative to the wrist strap system for standing operations.” (ANSI/ESD S20.20 section 6.2.2.2 Personnel Grounding Guidance)

“The use of floor materials to control personnel or equipment generated static has a number of benefits. Floor materials tend to be passive. Employees who work in areas protected with floor materials simply need to wear and test the appropriate footwear. They do not need to implement any additional actions themselves to assure that the floor material is functioning properly.” (ESD Handbook TR20.20 section 5.3.4.4)

Due to variations in computer monitor displays, color shown may not be exact.  For true accurate color, please email Service@desco.com to request an actual sample.