• Heat, chemical and abrasion resistant
  Excellent floor mat for around wave solder machines and other challenging manufacturing environments.
  Click here for Chemical Resistance Chart.
• Resistance to Ground 10E4 - 10E5 Ohms*
  Designed to meet requirements of ANSI/ESD S20.20** where operators use a foot grounding system for primary grounding purposes. Excellent choice for use around automated SMT and wave machines, shipping areas, and other environments where operators stand for long periods of time
• Easy to cut
  Configure to fit your requirements
• Durable homogeneous rubber
  Will never delaminate
• Reversible rubber
  Saves money, extends mat life
• Smooth surface on one side
  Easy to clean and maintain
• RTG <10E9 ohms
  Meets ESD protective flooring requirements of ANSI/ESD S20.20 and EIA-625
• Top of Mat kits laser engraved with ESD protective symbol and manufacturer
  Identifies ESD protective product for control and auditing purposes
• Non-humidity dependence
  Provides consistent electrical performance regardless of ambient humidity
• Exceeds ANSI/ESD S20.20 required limit of <1 x 10E9 ohms for ESD floor
• Suitable as floor in ANSI/ESD S7. 1 floor-footwear system
• Dimensionally stable
  Minimal shrinkage and curling
• Lead-free RoHS compliant
• Use our Molded Hook Tape to adhere mat to carpeting
• Use our Two-Sided Adhesive Tape to adhere mat to concrete, tile, and table tops
• Made in America

RTT 10E3 - 10E5 ohms “Conductive Flooring Material: A floor material that has a resistance to ground of less then 1.0 x 10E6 ohms.” (ESD STM7.1-2005 Definitions)

Meets ANSI/ESD S20.20 Table 1 technical requirements recommendations and is suitable for ESD floor component in Flooring - Footwear System as primary grounding method <3.5 x 10E7ohms per ESD STM 97.1 Floor Materials and Footwear-Resistance in Combination with a Person.

“ESD protective flooring, used with approved footwear, may be used as an alternative to the wrist strap system for standing operations.” (ANSI/ESD S20.20 section 6.2.2.2 Personnel Grounding Guidance)

“The use of floor materials to control personnel or equipment generated static has a number of benefits. Floor materials tend to be passive. Employees who work in areas protected with floor materials simply need to wear and test the appropriate footwear. They do not need to implement any additional actions themselves to assure that the floor material is functioning properly.” (ESD Handbook TR20.20 section 5.3.4.4)

Due to variations in computer monitor displays, color shown may not be exact.  For true accurate color, please email Service@desco.com to request an actual sample.

For Applications on
smooth floors, ask for:

Item #45015
2 - sided adhesive tape to safely secure mats on table tops and floors