• Excellent for use in assembly operations where matting may come in contact with hot soldering iron tips or solder splashes
• Meets ANSI/ESD S20.20 and ESD S4.1 recommendations
• Static dissipative top layer with a conductive bottom of synthetic rubber
• Compatible with continuous monitors
• Smooth finish
• Easily maintained with Reztore Surface and Mat Cleaner
• RTT: 10E6 - 10E8 ohms
• Thickness: 0.078"

This item available now on eBay!

Closeout items are subject to a 90-day warranty for materials and workmanship.  No credit will be issued.  Desco to approve exchange for similar items.

“Resistance-to-groundable point 1 x 10E6 to 1 x 10E9 ohms. Resistance from point-to-point greater than 1 megohm. These guidelines represent a range of resistance that has generally been proven to provide protection in the manufacturing environment.” Dirt and cleaners containing silicone are insulative and a dissipative ESD worksurface may not fulfil its function if covered by insulative material. (ESD S4.1 section 8. Resistance Guidelines)

“[RTG is] The most important functional consideration for worksurfaces. This establishes the resistance of the primary path to ground for items, placed on the surface. When worksurface materials are being selected, consideration should be given to possible Charged Device Model (CDM) damage to ESD sensitive products. If CDM damage is a concern then setting a lower resistance limit for the worksurface should be considered. Typically, the lower limit for these types of worksurfaces is 1 x 10E6 ohms.” (ESD Handbook TR20.20 section 5.3.1.7 Electrical Considerations)