ESD and Static Control, Protection, Supplies and Products
|
|
|
|
|
|
|
|
|
| Wrist Straps & Coil Cords |
|
|
|
| Worksurface Mats and Grounding Hardware |
|
| Floor Mats and Grounding Hardware |
|
| Floor Finish, Paint, and Epoxy |
|
|
| Monitors, Testers and Measurement |
|
|
| Education, Awareness, and Accessories |
|
|
|
|
|
|
Additional Images:
1
|
73613 - SMOCK,STATSHIELD,LABCOAT,CUFFS , BLUE, LARGE
|
You must be logged in
to purchase from
our online catalog.
Signup
or Login above.
|
|
|
| Fax / Email List Price |
Internet List Pricing |
|
|
|
|
|
| Technical Documents |
|
TB-2055
-
ESD Statshield® Protective Smocks Grounding, Testing and Maintenance
|
|
- Groundable Static Control Garment System Tested Per ANSI/ESD S20.20-2007 (RTG < 3.5 X 10E7) Requirements
Allows operators and smock to be bonded or electrically connected to ground to prevent ESD events in ESD Protected Areas.
- Conductive Knitted Cuff With Hip-To-Cuff Grounding
Allows operator to connect coil cord to snap to the hip of the smock for “hands-free” grounding, keeping the coil cord out of the workstation.
- Minimum Of 9% Carbon Conductive Nylon Fibers Woven In Chain-Link Design
Provides continuous and consistent charge dissipation throughout lifetime of smock.
- Creates Faraday Cage Effect Around Torso And Arms Of Operator
Shields ESD charges from operators’ clothing from damaging ESD sensitive devices.
- Panel To Panel Conductivity
Prevents isolated charged conductor in ESD Protected Area.
- 2-Year/100 Launderings Limited Warranty – Click HERE For Test Results
- Extended lifetime of garment will maintain its electrical and ESD properties.
- To See In-Use Picture Of Desco’s Hip-To-Cuff, Click Here
- Made In The United States of America
This item is made and stocked in Miami, FL
Estimated Shipping Weight: 0.60 Pounds
Click Here For Smock Sizes
Specifications:
- RTT sleeve to sleeve 10E5 – 10E6 ohms, per ANSI/ESD STM2.1
- Cuff electrical connection: knitted conductive fabric
Hip connection: 4mm stud snap
Design: 3 pockets, collar and cuff
Color: Blue
Fabric: Polyester with minimum 9% carbon fibers
Charge Decay: < 0.1 seconds per FTMS 101C/4046
Durability: 100 Minimum Launderings
What the ESD Association says about ESD Garments
Per ESD Handbook TR 20.20 paragraph 5.3.13.3.1.3 Garment Construction “The electrical integrity of the seams is critical and should be verified by electrical continuity measurements between all panels of the garment (ESD STM 2. 1).” To test ESD Smock, see Desco 19780 Surface Resistance Test Kit
|
|
|
Additional Information |
|
|
NOW AVAILABLE - Smocks with Custom Embroidery. CLICK HERE for details.
Click Here to Order a Custom Embroidered Smock
|
|
|
|
|
|