This item is unavailable or has been discontinued.
The following items have been marked as comparable substitutions.
Additional Images:
1
|
19212 - MONITOR, WORKSTATION, JEWEL, MINI, 120VAC, SAPPHIRE
|
You must be logged in
to purchase from
our online catalog.
Signup
or Login above.
|
|
|
| Fax / Email List Price |
Internet List Pricing |
|
Sorry, this item has not been setup for online pricing yet.
|
Sorry, this item has not been setup for online pricing yet.
|
|
|
| Technical Documents |
|
TB-3004
-
Workstation Continuous Mini Monitor: Operation, Installation, and Maintenance
|
|
- Single Station Continuous Monitor for Operator And ESD Work Surface
Continuously monitors the integrity of one operator and ESD workstation, eliminating the need for periodic testing and recording. Ideal for individual workstations for assembly, test, packaging or other applications.
- Wave Distortion Technology Provides Real-Time Continuous Monitoring for Operator Path to Ground and Presence of 1 Meg Resistor
True continuous monitoring (versus pulsed or intermittent) of wrist strap functionality and operator safety according to accepted industry standards.
- Park Snap Feature
Provides means for operator to disconnect wrist strap cord when normally leaving the workstation without audible (false) alarm sounding.
- Full Time Dual Status LEDs and Audible Alarm for Operator and Workstation Monitoring.
Audible and LED visual alarms activate instantly when a failure occurs alerting user and supervisor of problem, allowing immediate corrective action
- Miniscule Electrical Current Required to Generate Waveform Monitoring Signal
Safe to use with sensitive components and no reported case of skin irritation
- Includes to 10mm Snaps for Easy to Installation on Work Surface
Snap monitor flush on mat with no additional wires needed.
- Calibration Unit Available for Accurate Performance And Conformity
Testing In The Field (See Desco Item 98220 Click Here)
- NIST Calibrated
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of Desco products, see Calibration
- Made in America
This item is made and stocked in Chino, CA
Estimated Shipping Weight: 0.85 Pounds
Note: Continuous Monitors pay for themselves improving quality, productivity, eliminating wrist strap daily testing and test result logging. Per ESD-S1.1 paragraph 6.1.3 Frequency of Functional Testing "The wrist strap system should be tested daily to ensure proper electrical value. Daily testing may be omitted if constant monitoring is used." Per ESD Handbook TR 20.20 paragraph 5.3.2.4.4 "Typical test programs recommend that wrist straps that are used daily should be tested daily. However, if the products that are being produced are of such value that knowledge of a continuous, reliable ground is needed, and then continuous monitoring should be considered or even required."
Note: Work surface must have a conductive layer such as Dual Layer Rubber or Dissipative 3-Layer Vinyl or Micastat® Dissipative Laminate with conductive buried layers. Desco Continuous Monitors are not recommended for use with homogeneous matting.
Use with Desco mats Statfree T2™, Statfree Z2™, Statfree O™, Statfree B2™, and Statfree UC™
|
|