• Extruded Homogenous Vinyl
  Provides reliable path to ground and eliminates static charge generation as a worksurface table mat, shelf liner, and cart liner.
• Dissipative Worksurface - 10E6 - 10E8 Ohms RTT
  Slows charge removal; meets ANSI/ESD S20.20 worksurface required limit and recommendation of ANSI/ESD S4.1
• .100” Material Thickness
  Additional energy absorption for components susceptible to physical shock
• Laser Engraved With ESD Protective Symbol, Specs, and Manufacturer
  Identifies ESD protective product for control & auditing purposes
• Non-Humidity Dependence
  Provides consistent electrical performance regardless of ambient humidity
• Dimensionally Stable And Lays Flat
  Minimal shrinkage and curling
• Lead-free RoHS compliant
• Superior Limited Lifetime Warranty
  Electricals guaranteed for the life of the mat
• To See Mats In Use, Click Here
• Made In America
  This item is made and stocked in Canton, MA
  
  Estimated Shipping Weight: 65.50 Pounds

NOTE: Statfree® B mats do not work with continuous monitors. To select a worksurface that is compatible with continous monitors see the Desco’s Worksurface Mat Selection Chart Click Here

Per ESD Association: "The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point." ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 x 10E9 ohms. "If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x 10E6 ohms." "Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration." (Ref: TR 20.20 section 5.3.1).

Due to variations in computer monitor displays, color shown may not be exact.  For true accurate color, please email Service@Desco.com to request an actual sample.