ESD and Static Control, Protection, Supplies and Products
|
|
|
|
|
|
|
|
|
| Wrist Straps & Coil Cords |
|
|
|
| Worksurface Mats and Grounding Hardware |
|
| Floor Mats and Grounding Hardware |
|
|
|
| Monitors, Testers and Measurement |
|
|
| Education, Awareness, and Accessories |
|
|
|
|
|
|
|
19690 - WRIST STRAP, DUAL, ADJUSTABLE, 4MM SNAPS, 6FT RT ANGLE CORD
|
You must be logged in
to purchase from
our online catalog.
Signup
or Login above.
|
|
|
| Fax / Email List Price |
Internet List Pricing |
|
|
|
|
|
| Drawings |
|
19690
-
Silveron™ Dual Wire Adjustable Elastic Wristband
|
|
19695
-
SNAP-ONE™ Dual-Wire Coil Cord w/ Right Angle Mono Plug
|
|
- Use patented (6,052,053 and 6,205,408) Dual Wire Wrist Strap with Desco Dual Wire Continuous Monitor
- Dual Wire Wrist Strap provides redundancy; even if one dual wire wrist strap conductor is severed, operator has reliable path-to-ground with other wire
- Used with resistive loop technology continuous monitor, continuously verifies the proper resistance to ground of the operator
- Comfortable adjustable wrist band made of silver suffused monofilament conductive interior
- 4mm snaps are machined to precision profile from 300 series stainless steel for a consistent and reliable connection. 7mm snaps are stamped
- 304 stainless steel back plate
- Woven Silveron™ fabric infused with silver monofilament conductive fiber is comfortable and hypo-allergenic
- Superior resistor connection strain relief
Superior reliability. Greatly exceeds ESD S1.1 Bending Life Test. Tested at over 200,000 cycles vs. the 16,000 requirement
- Single (Snap-One™) snap head allows operators to quickly and easily attach and detach the cord from the wristband
- Park-it feature on Snap-One™ provides convenient park station for cord when not in use
- Patented (6,052,053 and 6,205,408) dual wire technology
- Superior warranty - See details of 1 year Limited Warranty
- Made in the United States of America
This item is made and stocked in Chino, CA
Estimated Shipping Weight: 0.11 Pounds
What the ESD Association says about testing wrist straps:
Per ESD Handbook TR20.20 section 5.3.9.1 Wrist Strap Checkers - “Wrist strap checkers have historically been the primary tool for testing the operation of the wrist strap system including, the wristband, grounding cord and most importantly, the electrical integrity of the contact between the wristband and the wearer. Wrist strap checkers measure the resistance of the entire system.”
ANSI/ESD S20.20 Paragraph 6.2.2.1 Personnel Grounding Requirement "All personnel shall be bonded or electrically connected to ground or contrived ground when handling ESD sensitive items. When personnel are seated at ESD protective workstations, they shall be connected to the common point via a wrist strap system."
|
|
|
Additional Information |
|
|
Click here for a Selection Chart on Desco Wrist Straps |
|
|
|
|
|