• 30% Off All Jewel® Dual-Wire MagSnap Wrist Straps. Use code PromoD391 on your online order. Expires February 20, 2012. Valid for online orders only.
• Revolutionary magnetic interconnect technology (U.S. Patent 5,004,425)
  Creates magnetic connection between wristband and coil cord; meets ESD S1.1, including disengagement force test (1-5 lbs)
• To be used with Dual-Wire MagSnap Coil Cord
• Dual-wire wrist strap provides redundancy
  If one dual wire wrist strap conductor is severed, operator still has reliable path-to-ground with other wire
• Longer lasting; prevents wear
• Superior resistor connection strain relief
  Superior reliability. Greatly exceeds ESD S1.1 Bending Life Test. Tested at over 11,000,000 cycles vs. the 16,000 requirement
• Compatible with 3M and other brand Continuous Monitors
• Adjustable
  Only one item to stock; may be fitted to almost all people
• Locking clasp
  Band locked so it will not slip
• To see MagSnap® magnetic connection, click here
• Made in the United States of America
  This item is made and stocked in Chino, CA.
  
  Estimated Shipping Weight: 0.18 Pounds

What the ESD Association says about wrist straps:

Jewel® Wrist Bands meet and exceed the Wrist Band and Wrist Cord requirements of ANSI/ESD S20.20 except that ESD S1.1 paragraph 5.9 states "Only wrist straps incorporating a nonstandard [resistor] value shall use the color red on any portion of the wrist strap."

ANSI/ESD S20.20 Paragraph 6.2.2.1 Personnel Grounding Requirement "All personnel shall be bonded or electrically connected to ground or contrived ground when handling ESD sensitive items. When personnel are seated at ESD protective workstations, they shall be connected to the common point via a wrist strap system."

"Daily (Wrist Strap) testing may be omitted if constant monitoring is used." (ESD S1.1 Section 6.1.3)