| • | Heat fused vinyl composite with top and bottom dissipative vinyl layers and conductive grid mesh inner layer Resists delamination; reduces unintended alternative ground paths. Compatible for use with continuous monitors. |
| • | Meets ESD worksurface required limit of ANSI/ESD S20.20 and recommendation of ANSI/ESD S4.1 |
| • | Conductive grid mesh inner layer Provides consistent, reliable, and defined grounding path, compatible with continuous monitors. |
| • | Dissipative cushioned vinyl bottom layer Provides energy absorption for components susceptible to physical shock like disk drives |
| • | Abrasion resistant top layer Smooth surface is easy to clean and maintain |
| • | Top of mat kits laser engraved with ESD protective symbol & manufacturer Identifies ESD protective product for control & auditing purposes |
| • | Non-humidity dependence Provides consistent electrical performance regardless of ambient humidity |
| • | Dimensionally stable Minimal shrinkage and curling |
| • | Lead-free RoHS compliant |
| • | Grounding Hardware not included |
| • | Made in America |
| Item | Description | Price | 20% Off |
| 42500 | Blue Vinyl Roll, 24 Inch x 50 Feet, .125 Thickness | $638.28 | $510.62 |
| 42515 | Grey Vinyl Roll, 24 Inch x 50 Feet, .125 Thickness | $638.28 | $510.62 |
| 42516 | Blue Vinyl Roll, 30 Inch x 50 Feet, .125 Thickness | $796.95 | $637.56 |
| 42517 | Grey Vinyl Roll, 30 Inch x 50 Feet, .125 Thickness | $796.95 | $637.56 |
| 42518 | Blue Vinyl Roll, 36 Inch x 50 Feet, .125 Thickness | $956.82 | $765.46 |
| 42519 | Grey Vinyl Roll, 36 Inch x 50 Feet, .125 Thickness | $956.82 | $765.46 |
| Per ESD Association: "The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point." ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 x 10E9 ohms. "If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x 10E6 ohms." "Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration." (Ref: TR 20.20 section 5.3.1). |
| *Five roll minimum order This offer may not be used in combination with any other Desco promotional offer. |
